3. The

high-resolution transmission electron microscopy (HRTEM) images were obtained using JEOL-2010 (Akishima-shi, Japan).   4. The UV–vis absorption spectra of the samples were measured using a UV-1800 ultraviolet–visible spectrophotometer (Shanghai Meipuda Instrument Co., Ltd., Shanghai, China).   The samples used for characterization were ultrasonically dispersed in absolute ethanol for 30 min before the TEM and HRTEM tests. Results and discussion Characterization of SiO2 · Eu2O3 HSs Newly prepared silica spheres were used to fabricate HSSs. The monodispersed SiO2 spheres with an average diameter of 230 nm (Figure 1A) were fabricated using the Stöber method [37–39] and acted as the template. The hollow SiO2 · Eu2O3 HSs were uniform, as shown in the HRTEM image in Figure 1B, whose size Entospletinib solubility dmso was nearly unchanged. XRD curves in Figure 1C demonstrate that both the SiO2 sphere and SiO2 · Eu2O3 hollow sphere are amorphous (compared with ICSD #174). The absence of diffraction peaks for Eu2O3 was owing to the few content of Eu2O3 in the sample. Figure 2 shows the HRTEM image and energy-dispersive spectrometer (EDS) analysis of SiO2 · Eu2O3 HSs. A large number of holes with different sizes on the surface of SiO2 · Eu2O3 YH25448 mouse HSs could be observed in Figure 2A, which belonged to a range of mesoporous structures according to the diameter of holes. The SiO2 · Eu2O3

HSs with numerous mesoporous structures indicated that they are potential drug carriers for application in Cyclooxygenase (COX) medicine, e.g., targeting therapy. The results of the EDS analysis showed that the content of O, Si, and Eu was 72.43%, 25.15%, and 2.22%, respectively. The microcontent of Ge (0.19%) was due to the impurity coming from the reagent of Eu2O3. The SiO2 HSs were amorphous according to their XRD pattern, so the lattice fringe that appeared on the HRTEM image (Figure 2B) stemmed from Eu2O3. The measured interplanar MK-4827 nmr spacing of 0.3 nm corresponded to the (001) plane of Eu2O3. Obviously, Eu2O3 is one component of the final product, and it may be embedded into the shells or form a kind of composite similar to ‘alloy’ or a solid solution. Further

research is in progress. Being doped with Eu2O3 on the surface of SiO2 HSs, the obtained samples can emit bright red light under an ultraviolet beam. HRTEM observation also revealed that the HSs produced in the solution contained Re3+ ions that formed a mesoporous structure with different orientations. Figure 1 TEM image of SiO 2 sphere (A), HRTEM image of SiO 2 ∙Eu 2 O 3 HSs (B), XRD patterns of SiO 2 sphere and SiO 2 ∙Eu 2 O 3 HSs (C). The insert is magnification of one segment of XRD. Figure 2 HRTEM images and EDS pattern of SiO 2   · Eu 2 O 3 HSs. (A) Mesoporous structure of SiO2 · Eu2O3. (B) The interplanar spacing of the (001) plane of Eu2O3. (C, D) EDS pattern and results of SiO2 · Eu2O3 HSs, respectively.